Water Treatment Plant Manufacturer in India
Aquantam designs and manufactures water treatment plants that turn raw water into water suited to its end use, from filtration and softening to clarification and purification, for industrial, commercial and institutional needs.
What is a water treatment plant?
A water treatment plant improves the quality of raw water, such as borewell, surface, municipal or tanker water, so that it meets the requirements of its end use. Depending on the source and the target, treatment removes suspended solids, turbidity, iron, hardness, organic matter, dissolved salts or microorganisms.
No single treatment train suits every source. Borewell water with high iron needs different treatment from turbid surface water or hard municipal supply. The plant is designed by working backwards from the treated-water quality required.
How a water treatment plant works
Stages are selected for the source water. Most plants use only some of the steps below.
Raw water intake and storage
Water is collected and stored so that flow to the treatment stages is steady and measurable.
Aeration or oxidation
Where iron, manganese or dissolved gases are present, aeration or chemical oxidation prepares them for removal.
Coagulation, flocculation and clarification
For turbid or surface water, chemicals bind fine particles into larger flocs that settle out in a clarifier.
Filtration
Multimedia or other filters remove remaining suspended solids and turbidity.
Activated carbon filtration
Carbon adsorbs chlorine, organic compounds, colour and odour where these need to be reduced.
Softening or ion exchange
Where hardness would cause scaling, softening removes calcium and magnesium; demineralization removes dissolved minerals more fully.
Membrane purification
Ultrafiltration or RO is added where fine particles or dissolved solids must be reduced further.
Disinfection and storage
Treated water is disinfected where required and stored ready for distribution or use.
Where water treatment plants are used
Industrial process water
Water conditioned to suit the process it feeds.
Cooling and utility make-up
Treatment that limits scaling, fouling and corrosion in utility systems.
Boiler feed preparation
Softening or demineralization stages ahead of boilers.
Commercial and residential buildings
Filtration, softening and purification for building water supply.
Institutions and campuses
Reliable treated water for schools, hospitals and large facilities.
Feed for further purification
Pretreatment ahead of RO, DM or other polishing steps.
How Aquantam approaches water treatment plants
Aquantam builds each water treatment plant as a customized treatment train, not a fixed catalogue model. We review your water data, propose the stages that suit it and, where included in scope, support manufacturing, installation and commissioning.
What determines water treatment plant design
- Raw water source and how much it varies
- Turbidity, iron, hardness, TDS and organics
- Required treated-water quality
- Flow rate and peak demand
- Storage and available space
- Operating and maintenance needs
- Power and chemical use
- Future expansion
Frequently Asked Questions
What is the difference between a water treatment plant and an RO plant?
A water treatment plant is the overall system that prepares raw water for use and may include filtration, clarification, softening and other stages. An RO plant is one type of membrane-based step, often used within or after a water treatment plant.
Which raw water sources can be treated?
Borewell, surface, municipal and tanker water can all be treated. The treatment stages depend on the contaminants each source carries.
What is a water purification plant?
A water purification plant treats water to a higher quality, often for drinking or sensitive process use, using stages such as filtration, carbon adsorption, membranes and disinfection.
How is water treatment plant capacity decided?
Capacity is based on average and peak demand, operating hours and expected growth, and is refined against your water-use data.
Does Aquantam supply industrial water treatment plants?
Yes. Aquantam designs and manufactures industrial water treatment plants engineered around feed-water quality, end use and capacity.
Request a Quote for Your Water Treatment Plant
Share your city, capacity and water details, along with any analysis report you have. Aquantam will review your requirement and come back with a suggested treatment approach and next steps.
Tell us about your requirement
Fields marked * are required.